|
|
|
For those visitors who are unfamiliar with English Bell-ringing , ringing Methods or Change-ringing, here is a brief explanation of the "mysterious art".
Bells in most English Towers are large; ranging in weight from a few hundred pounds to several tons and, like many things in life, are referred to in the feminine gender. A ring of bells will usually consist of four to twelve bronze bells. A bell in her usual resting position is 'rung down' and is free to swing gently in the breeze without sounding.  Drawing showing a bell
'rung down'Bells for change ringing are hung in stout frames that allow the bells to swing through 360 degrees. Each bell is attached to a wooden wheel with a handmade rope running around it. The mechanism achieves such exquisite balance that ten-year-olds and octogenarians can control the largest bell easily. The harmonic richness of a swinging bell cannot be matched by the same bell hanging stationary, but each swinging bell requires one ringer's full attention. The bells are arranged in the frame so their ropes hang in a circle in the ringing chamber below. Into each rope is woven a tuft of brightly coloured wool (sally), which marks where the ringer must catch the rope while ringing. Bells are rung from the "mouth up" position. With a pull of the rope, the bell swings through a full circle to the "up" position again. With the next pull it swings back in the other direction. The Science Because of their great momentum, bells take about two seconds to rotate, so they cannot be used to play ordinary "melodic" music. But they can be made to follow one another in order, each ringing once before the first rings again. Ringing bells in a precise relationship to one another is the essence of change ringing. Rung in the order from the lightest, highest pitched bell to the heaviest, the bells strike in a sequence known as rounds, which ringers denote by a row of numbers: 1 2 3 4 5 6 7 8 To produce pleasing variations in the sound, bells are made to change places with adjacent bells in the row, for example: 1 2 3 4 5 6 7 8 2 1 4 3 6 5 8 7 These rows are the musical notation of change ringing. No bell moves more than one place in the row at a time, although more than one pair may change in the same row. The Music No amount of explanation of change ringing - or its pleasures - can substitute for listening to and ringing bells. However, it may help non-ringers to enjoy change ringing if they know what to listen for. First, the rhythm should not vary from row to row. The rhythm provides the steady framework within which the complex changes are heard. Listen for two rows rung in precise tempo, followed by a pause equal to the stroke of one bell, followed by two more rows and so on. The pause will help you determine which bell rings first. Second, listen for the bell that strikes the lowest note. This is the tenor. Sometimes it always strikes last, even when the other bells are changing. Listen for the highest bell, the treble, as it makes its way through the rows. Listen also for the rows in which large bells alternate with small bells throughout the row. These are considered particularly musical, and composers strive to include as many such rows as possible. Method Ringing In order to ring a different row with each pull of the rope, ringers have devised methods, orderly systems of changing pairs. In ringing a method the bells begin in rounds, ring changes according to the method, and return to rounds without repeating any row along the way. These place changes produce musical patterns, with the sounds of the bells weaving in and out as if they were folk dancing with each other. The more bells involved, the longer the bells can be rung without repeating a row, frequently referred to as a change. Five bells allow 120 changes (1x2x3x4x5). The numbers increase rapidly. Six bells yield 720 changes (1x2x3x4x5x6), seven bells 5,040. Eight bells can be rung through 40,320 changes. Peal Ringing Experienced ringers test and extend their abilities by ringing peals: 5,000 or more changes without breaks or repeating a row. Peals customarily last about three hours. The first peal was rung in England in 1715. The first peal in North America was rung at Christ Church, Philadelphia, in 1850. The band included several ringers brought to the United States by P.T. Barnum for his circus. The first peal in Canada was rung at the Cathedral of the Holy Rosary, Vancouver, for the coronation of George V in 1911. In the past decade an average of 80 peals has been rung in North America each year.
|
| Welcome to Chaddesley Corbett |
